Gomco/Allied Medical: Portable Aspirator Model 300

Gomco/Allied Medical: Portable Aspirator Model 300

Product Specifications

Weight

23 lbs

Dimensions

12″H x 13″W x 9″D

Compressor

Diaphragm pump that is designed for general suction use

Motor

1/8 Horsepower; creates up to 22″ Hg vacuum


Gomco/Allied Medical: Thoracic Drainage Pump 6050 110/50

Gomco/Allied Medical: Thoracic Drainage Pump 6050 110/50

Product Specifications

Vacuum Range

0-50 cm H2O

Flow Rate

110 LPM minimum

Dimensions

33″H x 18″W x 17″D

Compressor

Continuous Duty High-Volume Pump

Motor

110/50 Hz


Hospira (Abbott) Plum A+

Product Specifications

Dimensions

8″ H x 8″ W x 6″ D, excluding pole clamp

Weight

9.5 lbs. with battery

Casing

High-impact plastic

Delivery Rate Range

Lines A & B:

0.1-99.9 ml/hr in 0.1 ml increments100-999 ml/hr in 1 ml increments

Concurrent Delivery

0.5 ml/hr minimum for each line

Plum Set

500 ml/hr cumulative (A+B) maximum

KVO

1.0 ml/hr or the last primary delivery rate, whichever is less

VTBI Range

0.1-99.9 ml in 0.1 ml increments100-9999 ml in 1 ml increments

Electrical Power Requirements

120V, 50-60 Hz, 35VA

Fuses

F1, F2, 250V, 0.5A

Power Cord

Hospital Grade AC Cord 10 ft long

Battery

One sealed lead acid, rechargeable 6V battery, internal

Battery Life

With a new fully charged battery, the infuser shall operate for a minimum of 6 hours at 125 ml/hr or less, or deliver 500 ml at 126 ml/hr or greater on one line.

Recharge

The battery charges whenever the pump is connected to AC power.  The recharge time is approximately 6 hours with the device operating at 125 ml/hr on one line.


Hospira (Abbott) Plum XL3

Product Specifications

Dimensions

13.75″H x 12.2″W x 7.5″D

Weight

20 lbs. with batteries

Casing

High impact plastic

Delivery Rate Range

0.1-99.9 ml/hr in 0.1 ml increments100-999 ml/hr in 1 ml increments

Volume to be Infused Range

0.1-99.9 ml in 0.1 ml increments

100-9999 ml in 1 ml increments

KVO Rate

The lower of 1 ml/hr or the primary delivery rate

Occlusion Range

10 PSIG (+5, -2 PSIG)

Power Requirements

100-130 VAC, 47/63 Hz, less than 60W

Power Cord

Hospital grade AC cord, 10ft long

Fuses

1.0 A, 250V, slow blowing

Batteries

Rechargeable and sealed, lead acid 8V batteries

Battery Life

A fully charged battery set will provide operating time of approximately 4 hours when all pumping units operate simultaneously at a rate of 125 ml/hr or a cumulative delivery of 1000 ml at any combination of rates and pumping units.

Battery Recharge

Recharge takes approximately 6 hours when the device is turned off.


Hospira (Abbott) Plum XLM

Product Specifications

Dimensions

Approximately 8.25H x 7.5W x 8.75D inches (including pole clamp)

Weight

Approximately 7.75 lbs (with battery)

Casing

High-impact plastic

Power Requirements

100-130 Vac, 50 to 60 Hz, less than 35 W

Power Cord

Hospital-grade AC (mains) cord. 10 feet long, with transparent plug

Fuses

0.5 A, 250 V. slo-blo

Battery

Sealed lead-acid rechargeable 8 V battery, internal to infusion system. Accessible for ease of field replacement, with color-coded leads and polarized connector.

Battery Operation

A fully charged new battery will provide eight hours of operation at 125 ml/hr, or 1000 ml total volume delivered, whichever occurs first

Recharge

The battery charges whenever the infusion system is connected to AC (mains) power. If the infusion system is operating at 125 ml/hr, a full recharge takes approximately 16 hours. If the infusion system is turned to OFF/CHARGE, recharge takes approximately eight hours.

Delivery Rate Range

Micro Mode:

.1 to 99.9 ml/hr

Macro Mode:

1 to 999 ml/hr (in 1 ml increments)

KVO

1 ml/hr

Dose Limit Range

1 to 9999 ml/hr (in 1 ml increments)

Occlusion Range

10 psig (+5, -2 psig)


Impact 754 Eagle Univent

Impact 754 Eagle Univent

Product Description

The best critical care transport ventilator on the market. Completely self contained, the Impact 754 Eagle is battery powered, weighs just over 12 lbs. and consumes no gas. Featuring an internal compressor and blender, the Eagle offers PEEP with Controlled Assist, SIMV, Intubated CPAP, and CMV (for Apnea backup) ventilation modes. Bright graphic LCD provides monitoring and alarm settings. An interactive demo/teaching mode assures fast startup sequence in as little as three steps. The Eagle is EMI/RFI & air medical certified.

Features:

  • Operation from Internal Compressor

  • Built in backup ventilator

  • Internal Air/Oxygen mixer

  • External Air & Oxygen inputs

  • Automatic Altitude Compensation

  • EMI/RFI Aeromedical Certification

  • Interactive user demo mode

  • Auto Backlighting of LCD display

  • Management of available gas or gases

  • Internal PEEP

  • Low cost disposable ventilator circuits

  • Apnea backup

  • AC-DC rechargeable battery

  • Airway pressure waveform graphics

  • Continuous display of all control settings


Kangaroo ePump

Revolutionizing the Delivery of Enteral Feeding

The Kangaroo™ ePump system is the latest innovation in enteral feeding pump technology. When patients require nutrition through continuous feeding, intermittent feeding or feeding and flushing, Kangaroo™ ePump enteral feeding pump delivers in one compact, easy-to-use device.

e means easy
Easy step-by-step prompts, intuitive user interface and simplified set loading.

e means everybody
Appropriate for virtually all patients, from infant through geriatric years.

e means everywhere
Easily transportable, with battery pack for up to 15 hours of backup power.

e means enteral
Continuous or bolus enteral feeding and flushing capabilities, accurately and reliably, all from one pump.

Features and Benefits

  • Five button, easy-to-use interface that walks the user through the programming process, and an alarm identification system that quickly resolves any problems that may arise
  • DEHP-free pump sets protect the patients from any adverse side effects associated with DEHP. All sets sold outside of EMEA are DEHP-free.
  • Anti-Free flow pump sets ensure patient safety and an accurate delivery of nutrition
  • The MISTIC (Magnetic Intelligent Set Type Identification Connector) Identification System recognizes the pump set type and offers appropriate programming options
  • Feeding and flushing sets offer programmed flushing intervals, eliminating the need to manually flush tubes and sets, and allowing for hydration and nutrition-programmed delivery
  • Maintains dosage delivery accuracy of +/- 10% of the volume to be delivered
  • Orientation independent delivery with no drip chamber, the pump can be used anywhere and on anyone
  • Memory settings enable prior settings to be saved for up to 72 hours
  • Screen and program lock-out feature prevents manipulation of pump delivery process if protection is desired

Specifications

  • History: 72 Hours
  • Languages: 16 Languages
  • Auto-Priming: 30 Seconds
  • Alarm Options: Non-critical, adjustable alarm volume
  • Size: 6.6 in x 6.4 in x 4.6 in
  • Weight: 2.3 lbs
  • Battery Life: 15 Hours
  • Occlusion Alarm: 15 psi
  • Accuracy: +/- 10%
  • Power Cord: Detachable
  • Flush Rate: 1960 ml/hr (maximum)
  • Flow Rate: 1-400 ml/hr (1 ml increments)
  • Flush Interval: 1-24 hr(s) in 1 hr increments
  • Voltage: Operates on 9V DC, 1.5 Amps. Use AC adapter for wall outlet usage.


Kangaroo Joey

User Interface

  • Intuitive user interface
  • Large, backlit LCD display
  • Step-by-step prompts to guide programming and operation
  • “Stoplight” LED array visually indicates pump status in a bright or darkened room

Ergonomics

  • Quiet operation
  • Compact, portable aesthetic design
  • Tabletop usage or IV pole mounting
  • Simple loading of pump sets
  • Transparent top door to protect pump set
  • Water-resistant
  • “Soft Touch” rubberized casing for easy grip and drop protection
  • “Quick Release” pole clamp for easy detachment of pump

Features

  • MISTIC (Magnetic Intelligent Set Type Identification Connector) Feed-Only vs. Feed & Flush Set identification system to ensure match between the pump’s user interface and pump set type
  • Automatic Anti-Free-Flow (AFF) System
  • Audible alarm to indicate errors or pump set loading conditions
  • Orientation-independent delivery design eliminates need for drip chamber on pump set
  • Sensor technology detects both upstream and downstream flow conditions
  • Continuous feed, intermittent feed, and flush capability
  • Auto-prime feature reduces the need for time-consuming manual priming
  • Hold feature with restart
  • “Keep Tube Open” (KTO) feature
  • Stores previous 72 hours of feeding and flushing history
  • 15 Languages


Kendall 7325

Kendall 7325

Product Specifications

Dimensions

6″H x 10.75″W x 4.5″D

Weight

9.3 pounds

Power Requirements

115 VAC, 50/60 Hz

Compression Type

Sequential, Gradient Pressure

Compression Cycle

11 seconds compression, decompression time based upon Vascular Refill Detection Measurement

Set Pressure

45 mmHg

Sleeve Cooling

Yes

Cycle Monitor

Yes

Bed Hook

Yes

Alarms

Low Pressure, High Pressure, Internal Electronics Malfunction


Kendall Express 9525

Kendall Express 9525

Product Specifications

Dimensions

6.2″ x 7″W x 4.5″D

Weight

3.5 pounds

Power Requirements

115 VAC, 50/60 Hz

Compression Type

Sequential, Gradient Pressure

Set Pressure

45 mmHg ankle, 40mmHg calf, 30 mmHg thigh

Cycle Duration

71 variable

Bed Hook

Yes

Alarms

Low Pressure, High Pressure, Internal Electronics Malfunction


Kinetec Spectra Knee CPM

An unbeatable combination of good looks and mechanical innovation sets Spectra apart as the Knee CPM of choice. The entire spectrum of needs for knee patients can now be addressed with a carriage that accommodates a full range of patients, without any additional accessories. Lightweight and exceptionally easy to carry, Spectra offers a quick set-up and practical operational modes that enhance patient comfort, compliance and results.

Features

  • Long-life DC motor and screw-drive mechanism
  • Anatomically correct alignment
  • Wide carriage (10″) accommodates all patients
  • Hyperextension (-10°) to full Flexion (120°)
  • Internally contained medical grade transformer
  • Exclusive Load Reverse ensures patient protection
  • Lightweight: only 24 pounds
  • Sleek design incorporates dual carry handles
  • Comfortable, easy-to-apply patient pad kit included
  • Patient lock-out prevents accidental program changes
  • Waterproof digital hand control that snaps conveniently into the foot support
  • Pause setting for up to 15 minutes of rest

Product Specifications

  • Length: 37″ (94cm)
  • Full Leg Size: 28″ to 41″ (71 to 104 cm)
  • Tibia: 15″ to 23″ (38 to 58 cm)
  • Femur: 13″ to 18″ (33 to 46 cm)


Maquet SERVO-i

Maquet SERVO-i

SERVO-i® combines a high level of clinical performance for invasive, non-invasive or neurally controlled ventilation with outstanding mobility and cost efficiency.

Configurations

  • SERVO-i Infant

  • SERVO-i Adult

  • SERVO-i Universal for all patient categories

Benefits

  • Same system for invasive and non-invasive ventilation of adult, pediatric and neonatal patients, at the bedside and during transport and MR examinations

  • Interchangeable modules can be used on all SERVO-i systems (CO2 Analyzer, Y Sensor and Edi plug-in modules, batteries, expiratory cassettes)

  • Plug-in modules and extra batteries can be inserted/ removed during ventilation

  • Quick automatic pre-use check of entire system including breathing circuit

  • 1 year/5,000 hours planned maintenance interval

Flexible

  • Switch between conventional pneumatic ventilation or neurally-controlled ventilation

  • Backup ventilation in case of apnea with automatic return to the supported mode if the patient starts to trigger breaths again

  • Sensitive fl ow and pressure triggering with fast response time minimizes the work of breathing

  • Compensation of compressible volume during inspiration

  • Adjustable trigger sensitivity, apnea times and alarm sound level settings

Get the User Manual Here