Superior ventilation:

Volume mode, pressure mode, electronic PEEP
Tidal volume compensation
One motion from mechanical to manual mode
Two key presses to total standby: end case
Cardiac bypass case mode

Open systems architecture:

Lower overall height
User configurable drawers/shelving

Innovative patient breathing system:

Eight machine hoses/cables integrated
“No tools” disassembly of components
Autoclavable and latex-free
Responsive location of common gas outlet

Improved low flow/reduced life cycle costs:

Fresh gas flow compensation-automatically
Smooth, faster acting fresh gas flow control
Minimum O2 flow of 50 mL
Dual air flow tube for low flow

See our Operating Manuals section to download the user manual.

Features:

ORM standard; ORMC optional.
Ventilator options: Pneumatic or electronic, ascending or descending bellows.
Oxygen monitor and CO2 absorber standard.
AVE Electronic ventilator.
Absorber and scavenger
Oxygen analyzer
Breathing pressure monitor
Respiratory volume
Centralized alarm and data
Oxygen ratio controller
Pressure limit controller
Drager 19.1 vaporizer available

Specifications:

Maximum Height: 68″ (173cm)
Maximum Width: 40″ (102cm)
Maximum Depth: 25″ (63.5cm)
Table-top Height: 34″ (86cm)
Table-top Area: 271 in. sq. (1,749cm²)
Shelf Area: 200 in. sq. (1,290cm²)

Drawer Dimensions:

Large: 14″x21″x7″ (36x52x18cm)
Small: 14″x17″x3″ (36x43x8cm)
Nominal Weight: 325 lb. (147kg)

Features:

Interfaces with a full range of patient monitoring devices.
Provides a fully adjustable remote display with:

• real-time numeric and waveform information
• centralized alarm messages
• configurations to various informational formats.

Specifications:

H x W x D – 40 x 68 x 25 in
Weight – 150kg / 400 lbs
Top Shelf – 32 x 15 in

Features:

Up to Three Optional Vaporizers
AVE Electronic ventilator
Absorber and scavenger
Oxygen analyzer
Breathing pressure monitor
Respiratory volume
Centralized alarm and data
Oxygen ratio controller
Pressure limit controller
AVE Ventilator
CO2, NIBP, and SPO2 monitoring

Specifications:

Weight: 400 lb approximately
Max Dimensions: 40 x 68 x 25 in (1 x h x w)
Top shelf: 32 x 15 in (L x W)
Table top: Area: 271 in sq

Gas Delivery System Information:

Standard Gases: The Narkomed 3 is equipped with pneumatic circuitry for the delivery of oxygen (o2) and nitrous oxide (N2O). It has at least on oxygen and one nitrous oxide yoke for reserve gas cylinders with flush-type valves. The Pin Index Safety System prevents connection of a cylinder of the incorrect type.

Option Gases: In addition to oxygen and nitrous oxide, the NARKOMED 3 may be equipped with up to two additional gases. The additional gas may be air, helium, (He), nitrogen (N2), or carbon dioxide (CO2). The additional gas may be supplied to the anesthesia system by means of pin-indexed cylinders and yokes, by Diameter Indexed Safety System (DISS) pipeline connections, or by both systems, if so selected.

Color Coding: Each connection, valve, gauge, and flowmeter is labeled and color-coded for the appropriate gas.

Features:

19.1 vaporizers
AVE ventilator
NIB
SPO2
CO2
Built in monitor

Options:

Air system
PEEP
Boom Arm

Specifications:

Weight: 500lb (226.8kg)
Height: 64 3/4 in (165.5 cm)
Width: 31 3/4 in (80.6 cm)
Depth: 25 1/8 in (63.8 cm)
Shelf area: 200 in sq (1,290 cm sq)
Power Supply: 117 volts
Optional Power Supply: 220/240 volts
Backup Battery: Charging time: <12 hours Reserve power time: >25 minutes

Features:

Advance anesthesia ventilation
Optimized system for low flow anesthesia
Warmed breathing system
Low Fow Wizard
Accurate, reliable flow sensor
Integrated gas and agent monitoring with optional integrated physiologic monitoring

Features:

Weight (base unit without vaporizers or cylinders): 224 lbs (101.6 kg)
Dimensions: (W) 89.5 cm x (H) 130 cm x (D) 82 cm 35.2 x 51.2 x 32.3 inches)
Power Supply: 100-240 VAC, 50/60 Hz, 2.3 A max.
Battery (supports ventilator and monitor): > 45 min
Ventilator E-vent: Electronically controlled, electrically driven
Breathing Frequency: 4 to 60 bpm
Max. Minute Volume (MV): 25 L/min
Positive End-Expiratory Pressure (PEEP): 0-20 cmH2O
Inspiration/Expiration Ratio (Ti:Te): 4:1 to 1:4
Pressure Limiting (Pmax): 15-70 cmH2O
Tidal Volume (Vt): 20-1400 mL in Volume Control; 20-1100 mL in SIMV/PS
Inspiratory pause (Tip:Ti): 0-50%
SIMV Inspiratory Time (Tinsp): 0.3-4.0 sec
Inspiratory Pressure (Pinsp): PEEP + 5 to 65 cmH2O
Inspiratory Flow (InspFlow): 10-75 L/min in Volume and Pressure Control, 10-85 L/min in Pressure Support
Pressure Support Level (ΔPPS): PEEP + 3 to 20 cmH2O
Min. Frequency for Apnea-Ventilation (Freq. Min.): 3-20 bpm and “OFF”
Trigger: 2-15 L/min
Range of Fresh Gas Flow Indicators: 0.00 to 12.0 L/min
Total Fresh Gas Flow Meter: 0 to 10 L/min, calibrated with a mixture of 50 % O2 and 50 % N2O mixture
O2 Flush: at 87 psi (6 bar): max.75 L/min, at 41 psi (2.8 bar): min 25 L/min
Vaporizer Mount: Drager or Selectatec® mount
Serial Interface: 1 x RS-232 (standard), 1 x RS-232 (option)
Protocols: Vitalink and Medibus
Data Available for Export: All fresh gas flow, ventilation and O2 data
Volume of CO2 Absorber: 1.5 Liter, option: Drager medical’s consumable CLIC absorber
Volume of Entire compact Breathing System: 2.8 Liter + bag

Features:

Low overall height
Exhaled volume, airway pressure and inspired oxygen monitoring capabilities
Direct access to ventilator parameters
Pressure bar graph for visual reference on a breath-by-breath basis
Mechanical bag/vent switch turns ventilator on/off
Smart alarms direct user to specific problems
Fresh gas flow compensation- automatically
Autoclavable and latex-free
Integrated machine hoses/capabilities

Dimensions:

Height: 134.5 cm/52.9 in
Width: 72 cm/28.3 in
Depth: 73 cm/28.7 in
Weight: Approximately 108 kg/238 lb

Top shelf:

Weight limit: 34 kg/75 lb
Width: 66 cm/26 in
Depth: 40 cm/15.75 in